Key Features:
- Eco-friendly formulation, solvent-free; complies with RoHS Directive, REACH Regulation, and FDA certification.
- Single-component, neutral-curing at room temperature—no heating required, fast curing speed.
- Excellent transparency, allowing clear visibility of PCB components after coating.
- Superior self-leveling properties for easy application.
- Strong adhesion to glass, metals, PC, PCB, and other substrates.
- Outstanding protective properties:
- Waterproof, moisture-proof, dustproof.
- Resistant to salt spray, aging, shock, leakage, corrosion, mold, and loosening of components.
- Excellent electrical insulation.
- Exceptional temperature resistance:
- Remains flexible at -50°C (no brittleness, hardening, or cracking).
- Stable at 150°C (no softening or degradation), maintaining long-term elasticity.
Primary Applications：
- Widely used for insulation protection of circuit boards and electronic components.
- Ideal for:
- Hybrid ICs, automotive ECU boards, electronic PCBs.
- Aviation instruments, flexible printed circuits (FPCs).
- Computer control boards, industrial PCBs.
- Semiconductor circuit protection, home appliance controllers.
- Outdoor LED displays.
- Customizable: Can be formulated into colored coating adhesives with bonding or confidentiality functions per customer requirements.
- Transparent flowable bonding & sealing:
- Bonding glass kettles to stainless steel heating bases.
- Other transparent self-leveling adhesive/sealing applications.
Technical Specifications
| Property | Test Value | Test Method |
| Appearance | Translucent fluid | Visual Inspection |
| Tack-free Time | 10-20 mins | GB/T13477.5-2002 |
| Density | 1.02g/cm3 | GB/T13477.2-2002 |
| Hardness (Shore A) | 30±5 | GB/T 531.1-2008 |
| Tensile Strength | 0.56 MPa | GB/T 528-2009 |
| Elongation at break | 100% | GB/T 528-2009 |
| Volume resistivity | 1.0×1015 ,,W.cm | GB/T 1692-2008 |
| Dielectric strength | 18KV/mm | GB/T 1695-2005 |
Note：Testing conditions: 23±2°C, 50±5% RH.
Application Guidelines
Optimal Conditions: Temperature 4°C–40°C, relative humidity 40%–80%.
1.Surface Preparation
- Clean substrates thoroughly using solvents such as anhydrous ethanol, isopropanol, or acetone to remove rust, dust, grease, and moisture.
2.Application
- Cut the nozzle with a utility knife and dispense the adhesive evenly onto the prepared surface.
- Align and fix the bonded surfaces within the tack-free time (6 minutes).
- Allow curing at room temperature for 24 hours before use.
3.Storage After Use
- Tighten the cap immediately after use.
- If a skin forms at the nozzle, remove it before reuse.
Packaging Specifications:
- 300 mL/cartridge: 24 cartridges per box.
- 2.6 L/sausage: 4 sausages per box.
- Steel drums: 200 kg net weight per drum.
Storage
- Store in a cool, dry place below 27°
- Shelf life: 12 months from the production date.
- Handle and transport as general chemicals.
Safety&Precaution
- Keep out of reach of children.
- Skin contact: Wipe off immediately and rinse with water.
- Eye contact: Flush with water for 15 minutes and seek medical attention.
- Use in well-ventilated areas.
Important Notes
- Users must thoroughly understand product properties and perform compatibility tests prior to application.
- Due to the diversity of real-world applications, our company does not guarantee performance under specific conditions and assumes no liability for direct, indirect, or incidental damages.
- For technical support, contact our engineers for tailored solutions.
